一、系統環境

系統：CentOS7-1708
IP地址：192.168.159.33

二、安裝seafile

[root@seafile ~]# yum -y install epel-release
[root@seafile ~]# rpm –import http://li.nux.ro/download/nux/RPM-GPG-KEY-nux.ro
[root@seafile ~]# yum -y install Python-imaging MySQL-python python-memcached python-ldap python-urllib3 ffmpeg ffmpeg-devel
[root@seafile ~]# yum -y install python-pip
[root@seafile ~]# pip install –upgrade pip
[root@seafile ~]# pip install pillow moviepy
[root@seafile ~]# yum install -y mariadb-server ##安裝數據庫
[root@seafile ~]# systemctl enable mariadb ##設置數據庫開機啟動
[root@seafile ~]# systemctl start mariadb ##啟動數據庫
[root@seafile ~]# mysql_secure_installation ##為數據庫設置密碼
[root@seafile ~]# wget http://seafile-downloads.oss-cn-shanghai.aliyuncs.com/seafile-server_6.2.3_i386.tar.gz ##下載seafile軟件包
[root@seafile ~]# tar -zxf seafile-server_6.2.3_x86-64.tar.gz ##解壓軟件包
[root@seafile ~]# mkdir -p seafile/installed/ ##創建安裝包存放位置
[root@seafile ~]# mv seafile-server_6.2.3_x86-64.tar.gz seafile/installed/
[root@seafile ~]# mv seafile-server-6.2.3/ seafile/
[root@seafile ~]# cd seafile/
[root@seafile seafile]# cd seafile-server-6.2.3/
[root@seafile seafile-server-6.2.3]# ./setup-seafile-mysql.sh ##會要填很多信息，按要求填就可以了

三、設置防火墻、selinux

設置SELinux
[root@seafile ~]#vi /etc/selinux/config
將SELINUX=enforcing改為SELINUX=disabled
使selinux立即生效
[root@seafile ~]#setenforce 0
添加防火墻允許通行端口
[root@seafile ~]#firewall-cmd –zone=public –add-port=8000/tcp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=8082/tcp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=3306/tcp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=10001/tcp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=12001/tcp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=8000/udp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=8082/udp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=3306/udp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=10001/udp –permanent
[root@seafile ~]#firewall-cmd –zone=public –add-port=12001/udp –permanent
[root@seafile ~]#firewall-cmd –reload ##加載防火墻規則使其立即生效
[root@seafile ~]#firewall-cmd –zone=public –list-ports ##查看放行端口

四、啟動seafile

啟動seafile
[root@seafile seafile-server-6.2.3]# ./seafile.sh start # 啟動 Seafile 服務
[root@seafile seafile-server-6.2.3]# ./seahub.sh start # 啟動 Seahub 網站 （默認運行在8000端口上)，可指定端口
設置開機啟動（ExecStart ExecStop替換為相應安裝位置）
[root@seafile ~]#vi /usr/lib/systemd/system/seafile.service
[Unit]
Description=Seafile Service
After=network.target
After=mariadb.service
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/seafile/seafile/seafile.sh start
ExecStart=/seafile/seafile/seahub.sh start
#ExecStop=/seafile/seafile/seafile.sh stop
#ExecStop=/seafile/seafile/seahub.sh stop
[Install]
WantedBy=multi-user.target
[root@seafile ~]#systemctl enable seafile
[root@seafile ~]#systemctl start seafile
[root@seafile ~]#systemctl status seafile