linux刪除的文件如何恢復？下面本篇文章給大家介紹一下恢復Linux刪除文件的方法。有一定的參考價值，有需要的朋友可以參考一下，希望對大家有所幫助。

linux不像windows有個回收站，使用rm -rf *基本上文件是找不回來的。

那么問題來了：

對于linux下誤刪的文件，我們是否真的無法通過軟件進行恢復呢?

答案當然是否定的，對于誤刪的文件，我們還是能通過軟件恢復過來的。對于誤刪文件還原可以分為兩種情況:

• 一種是刪除以后在進程存在刪除信息

• 一種是刪除以后進程都找不到，只有借助于工具還原。

接下來以例子分別解說下兩種不同的誤刪還原方式：

誤刪除文件進程還在的情況:

這種一般是有活動的進程存在持續標準輸入或輸出，到時文件被刪除后，進程PID依舊存在。這也是有些服務器刪除一些文件但是磁盤不釋放的原因。

打開一個終端對一個測試文件做cat追加操作：

[root@docking ~]# echo "This is DeleteFile test." > deletefile.txt [root@docking ~]# ls deletefile.txt [root@docking ~]# cat >> deletefile.txt  Add SomeLine into deletefile for fun.

打開另外一個終端查看這個文件可以清楚看到內容：

[root@docking ~]# ls deletefile.txt [root@docking ~]# cat deletefile.txt  This is DeleteFile test. Add SomeLine into deletefile for fun.

此時，刪除文件rm -f deletefile.txt

[root@docking ~]# rm -f deletefile.txt  [root@docking ~]# ls #命令查看這個目錄，文件已經不存在了，那么現在我們將其恢復出來。

• lsof查看刪除的文件進程是否還存在。

• 如沒有安裝請自行yum install lsof或者apt-get install lsof

1、類似這種情況，我們可以先lsof查看刪除的文件 是否還在

[root@docking ~]# lsof | grep deletefile cat       21796          root    1w      REG              253,1        63     138860 /root/deletefile.txt (deleted)

2、恢復cp /proc/pid/fd/1 /指定目錄/文件名

進入 進程目錄，一般是進入/proc/pid/fd/,針對當前情況：

[root@docking ~]# cd /proc/21796/fd [root@docking fd]# ll 總用量 0 lrwx------ 1 root root 64 1月  18 22:21 0 -> /dev/pts/0 l-wx------ 1 root root 64 1月  18 22:21 1 -> /root/deletefile.txt (deleted) lrwx------ 1 root root 64 1月  18 22:21 2 -> /dev/pts/0

恢復操作：

[root@docking fd]# cp 1 ~/deletefile.txt.backup [root@docking fd]# cat ~/deletefile.txt.backup  This is DeleteFile test. Add SomeLine into deletefile for fun.

3、恢復完成。

誤刪除的文件進程已經不存在，借助于工具還原

準備一些文件目錄

#準備一份掛載的盤 mkdir backuptest cd backuptest mkdir deletetest mkdir deletetest/innerfolder echo "Delete a folder test." > deletetest/innerfolder/deletefile.txt   echo "tcpdump:x:172:72::/:/sbin/nologin" > tmppasswd

最后準備的目錄結構如下：

taroballs@taroballs-PC:/media/taroballs/taroballs/backuptest$ cd .. taroballs@taroballs-PC:/media/taroballs/taroballs$ tree backuptest/ backuptest/ ├── deletetest │   └── innerfolder │       └── deletefile.txt └── tmppasswd  2 directories, 2 files

現在開始刪除該目錄rm -rf backuptest/

taroballs@taroballs-PC:/media/taroballs/taroballs$ rm -rf backuptest/ taroballs@taroballs-PC:/media/taroballs/taroballs$  ls  -l 總用量 0

這種情況一般是沒有守護進行或者后臺進程對其持續輸入，所以刪除就真的刪除了。lsof也看不到，故需要采用工具進行恢復。

現在開始進行誤刪除文件的恢復。

我們采用的工具是extundelete第三方工具。恢復步驟以及注意事項如下：

• 停止對當前分區做任何操作，防止inode被覆蓋。inode被覆蓋基本就告別恢復了。

• 夸張一點講，比如停止所在分區的服務，卸載目錄所在的設備，有必要的情況下都可以斷網。

• 通過dd命令對 當前分區進行備份，防止第三方軟件恢復失敗導致數據丟失。

• 適合數據非常重要的情況，這里是例子，所以就沒有備份，如備份可以考慮如下方式：dd if=/path/filename of=/dev/vdc1

• 通過umount命令，對當前設備分區卸載。或者fuser 命令umount /dev/vdb1

• 如果提示設備busy，可以用fuser命令強制卸載：fuser -m -v -i -k ./

• 下載第三方工具extundelete安裝，搜索誤刪除的文件進行還原

extundelete工具安裝

extundelete下載地址：http://extundelete.sourceforge.net/

wget https://nchc.dl.sourceforge.net/project/extundelete/extundelete/0.2.4/extundelete-0.2.4.tar.bz2

解壓該文件tar jxvf extundelete-0.2.4.tar.bz2

若報這種錯誤

[root@docking ~]# tar jxvf extundelete-0.2.4.tar.bz2  tar (child): bzip2：無法 exec: 沒有那個文件或目錄 tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now

則使用yum -y install bzip2進行解決

[root@docking ~]# tar jxvf extundelete-0.2.4.tar.bz2  extundelete-0.2.4/ extundelete-0.2.4/acinclude.m4 extundelete-0.2.4/missing extundelete-0.2.4/autogen.sh extundelete-0.2.4/aclocal.m4 extundelete-0.2.4/configure extundelete-0.2.4/LICENSE extundelete-0.2.4/README ...................................................

cd  extundelete-0.2.4 ./configure

若這步驟報錯

[root@docking extundelete-0.2.4]# ./configure  Configuring extundelete 0.2.4 configure: error: in `/root/extundelete-0.2.4': configure: error: C++ compiler cannot create executables See `config.log' for more details

則使用yum -y install gcc-c++解決.

若執行上一步仍然報錯，

[root@docking extundelete-0.2.4]# ./configure  Configuring extundelete 0.2.4 configure: error: Can't find ext2fs library

則使用yum -y install e2fsprogs e2fsprogs-devel來解決。
#Ubuntu的解決辦法為sudo apt-get install e2fslibs-dev e2fslibs-dev

不出意外的話到這里應該configure能夠順利完成.

[root@docking extundelete-0.2.4]# ./configure  Configuring extundelete 0.2.4 Writing generated files to disk [root@docking extundelete-0.2.4]#

最后make然后 make install

[root@docking extundelete-0.2.4]# make make -s all-recursive Making all in src extundelete.cc: 在函數‘ext2_ino_t find_inode(ext2_filsys, ext2_filsys, ext2_inode*, std::string, int)’中: extundelete.cc:1272:29: 警告：在 {} 內將‘search_flags’從‘int’轉換為較窄的類型‘ext2_ino_t {aka unsigned int}’ [-Wnarrowing]     buf, match_name2, priv, 0};                              ^ [root@docking extundelete-0.2.4]# make install Making install in src   /usr/bin/install -c extundelete '/usr/local/bin'

extundelete安裝完成.

掃描誤刪除的文件：

使用df -lh查看掛載：

taroballs@taroballs-PC:~$ df -lh 文件系統        容量  已用  可用 已用% 掛載點 udev            1.9G     0  1.9G    0% /dev tmpfs           387M  1.8M  385M    1% /run /dev/sda2        92G   61G   26G   71% / tmpfs           1.9G   49M  1.9G    3% /dev/shm tmpfs           5.0M  4.0K  5.0M    1% /run/lock tmpfs           1.9G     0  1.9G    0% /sys/fs/cgroup /dev/sda3       104G   56G   44G   57% /home tmpfs           387M   40K  387M    1% /run/user/1000 /dev/sda4        70G   20G   47G   30% /media/taroballs/d8423f8c-d687-4c03-a7c8-06a7fb57f96d /dev/sdb1       6.8G  4.1G  2.8G   60% /media/taroballs/taroballs /dev/sr0        4.0G  4.0G     0  100% /media/taroballs/2018-01-16-12-36-00-00 taroballs@taroballs-PC:~$ cd /media/taroballs/taroballs/ taroballs@taroballs-PC:/media/taroballs/taroballs$

可以看到，我們的目錄/media/taroballs/taroballs

掛載到/dev/sdb1 這個文件系統中.

umount我們的掛載盤

比如：

taroballs@taroballs-PC:~$ df -lh | grep /dev/sdb1 /dev/sdb1       6.8G  4.1G  2.8G   60% /media/taroballs/taroballs

umount這個目錄

taroballs@taroballs-PC:~$ umount /media/taroballs/taroballs taroballs@taroballs-PC:~$ df -lh | grep /dev/sdb1 taroballs@taroballs-PC:~$  #記得刪除一定要后umount哦，不然二次寫入誰也幫不了你呢。

通過inode節點恢復

taroballs@taroballs-PC:~$ mkdir recovertest taroballs@taroballs-PC:~$ cd recovertest/ taroballs@taroballs-PC:~/recovertest$

執行恢復extundelete /dev/sdb1 --inode 2

taroballs@taroballs-PC:/media/taroballs/taroballs$ sudo extundelete /dev/sdb1 --inode 2 NOTICE: Extended attributes are not restored. Loading filesystem metadata ... 8 groups loaded. Group: 0 Contents of inode 2:   . .省略N行   File name                                       | Inode number | Deleted status .                                                 2 ..                                                2 deletetest                                        12             Deleted tmppasswd                                            14             Deleted

通過掃描發現了我們刪除的文件夾，現在執行恢復操作。

（1）恢復單一文件tmppasswd

taroballs@taroballs-PC:~/recovertest$  extundelete /dev/sdb1 --restore-file passwd    NOTICE: Extended attributes are not restored. Loading filesystem metadata ... 8 groups loaded. Loading journal descriptors ... 46 descriptors loaded. Successfully restored file tmppasswd

恢復文件是放到了當前目錄RECOVERED_FILES。

查看恢復的文件：

taroballs@taroballs-PC:~/recovertest$ cat tmppasswd  tcpdump:x:172:72::/:/sbin/nologin

（2）恢復目錄deletetest

extundelete /dev/sdb1 --restore-directory  deletetest NOTICE: Extended attributes are not restored. Loading filesystem metadata ... 8 groups loaded. Loading journal descriptors ... 46 descriptors loaded. Searching for recoverable inodes in directory deletetest ...  5 recoverable inodes found. Looking through the directory structure for deleted files ...

（3）恢復所有

taroballs@taroballs-PC:~/recovertest$ extundelete /dev/sdb1 --restore-all NOTICE: Extended attributes are not restored. Loading filesystem metadata ... 8 groups loaded. Loading journal descriptors ... 46 descriptors loaded. Searching for recoverable inodes in directory / ...  5 recoverable inodes found. Looking through the directory structure for deleted files ...  0 recoverable inodes still lost.  taroballs@taroballs-PC:~/recovertest$ tree  backuptest/ ├── deletetest │   └── innerfolder │       └── deletefile.txt └── tmppasswd 2 directories, 2 files

（4）恢復指定inode

taroballs@taroballs-PC:~/recovertest$ extundelete /dev/sdb1 --restore-inode 14 NOTICE: Extended attributes are not restored. Loading filesystem metadata ... 8 groups loaded. Loading journal descriptors ... 46 descriptors loaded. taroballs@taroballs-PC:~/recovertest$ cat file.14  tcpdump:x:172:72::/:/sbin/nologin #注意恢復inode的時候，恢復 出來的文件名和之前不一樣，需要單獨進行改名。

最后附上extundelete的用法:

$ extundelete --help Usage: extundelete [options] [--] device-file Options:   --version, -[vV]       Print version and exit successfully.   --help,                Print this help and exit successfully.   --superblock           Print contents of superblock in addition to the rest.                          If no action is specified then this option is implied.   --journal              Show content of journal.   --after dtime          Only process entries deleted on or after 'dtime'.   --before dtime         Only process entries deleted before 'dtime'.Actions:   --inode ino            Show info on inode 'ino'.   --block blk            Show info on block 'blk'.   --restore-inode ino[,ino,...]                          Restore the file(s) with known inode number 'ino'.                          The restored files are created in ./RECOVERED_FILES                         with their inode number as extension (ie, file.12345).   --restore-file 'path'  Will restore file 'path'. 'path' is relative to root                          of the partition and does not start with a '/'                          The restored file is created in the current                          directory as 'RECOVERED_FILES/path'.   --restore-files 'path' Will restore files which are listed in the file 'path'.                          Each filename should be in the same format as an option                          to --restore-file, and there should be one per line.   --restore-directory 'path'                          Will restore directory 'path'. 'path' is relative to the                          root directory of the file system.  The restored                          directory is created in the output directory as 'path'.   --restore-all          Attempts to restore everything.   -j journal             Reads an external journal from the named file.   -b blocknumber         Uses the backup superblock at blocknumber when opening                          the file system.   -B blocksize           Uses blocksize as the block size when opening the file                          system.  The number should be the number of bytes.   --log 0                Make the program silent.   --log filename         Logs all messages to filename.--log D1=0,D2=filename   Custom control of log messages with comma-separated    Examples below:       list of options.  Dn must be one of info, warn, or   --log info,error      error.  Omission of the '=name' results in messages   --log warn=0          with the specified level to be logged to the console.    --log error=filename  If the parameter is '=0', logging for the specified                          level will be turned off.  If the parameter is                          '=filename', messages with that level will be written                          to filename.    -o directory          Save the recovered files to the named directory.                          The restored files are created in a directory                          named 'RECOVERED_FILES/' by default.

推薦：《linux教程》