excel條件計數函數countif Countif條件計數函數用法大全，作為經常和辦公軟件打交道的你這些問題是不是經常困擾著你，小編今天這篇文章就是幫助你解決excel條件計數函數countif這個問題，當你再次遇到excel條件計數函數countif Countif條件計數函數用法大全這個問題的時候，我相信你絕對不會再犯愁了，下面就跟我一起來學習一下這個知識吧！

一、求各種類型單元格的個數

(1) 求真空單元格單個數：=COUNTIF(data,"=")

(2) 真空+假空單元格個數：=COUNTIF(data,"") 相當于countblank()函數

(3) 非真空單元格個數：=COUNTIF(data,"<>") 相當于counta()函數

(4) 文本型單元格個數：=COUNTIF(data,"*") 假空單元格也是文本型單元格

(5) 區域內所有單元格個數：=COUNTIF(data,"<>""")

(6) 邏輯值為TRUE的單元格數量 =COUNTIF(data,TRUE)

小說明：

EXCEL單元格內數據主要有以下幾類：數值型,文本型,邏輯型,錯誤值型。其中時間類型也是一種特殊的數值。文本類型的數字是文本型。

空單元格：指什么內容也沒有的單元格，姑且稱之為真空。

假空單元格：指0字符的空文本，一般是由網上下載來的或公式得來的，姑且稱之為假空。

date指單元格區域，該參數不能是數組

二、求><=某個值的單元格個數

(1) 大于50 =COUNTIF(data,">50")

(2) 等于50 =COUNTIF(data,50)

(3) 小于50 =COUNTIF(data,"<50")

(4) 大于或等于50 =COUNTIF(data,">=50")

(5) 小于或等于50 =COUNTIF(data,"<=50") ¬

(6) 大于E5單元格的值 =COUNTIF(data,">"&$E$5)

(7) 等于E5單元格的值 =COUNTIF(data,$E$5)

(8) 小于E5單元格的值 =COUNTIF(data,"<"&$E$5)

(9) 大于或等于E5單元格的值 =COUNTIF(data,">="&$E$5)

(10) 小于或等于E5單元格的值 =COUNTIF(data,"<="&$E$5)

三、等于或包含某N個特定字符的單元格個數

(1) 兩個字符 =COUNTIF(data,"??")

(2) 兩個字符并且第2個是B =COUNTIF(data,"?B")

(3) 包含B =COUNTIF(data,"*B*")

(4) 第2個字符是B =COUNTIF(data,"?B*")

(5) 等于“你好” =COUNTIF(data,"你好")

(6) 包含D3單元格的內容 =COUNTIF(data,"*"&D3&"*")

(7) 第2字是D3單元格的內容 =COUNTIF(data,"?"&D3&"*")

注：countif()函數對英文字母不區分大小寫，通配符只對文本有效

四、兩個條件求個數

(1) >10并且<=15 =SUM(COUNTIF(data,">"&{10,15})*{1,-1})

(2) >=10并且<15 =SUM(COUNTIF(data,">="&{10,15})*{1,-1})

(3) >=10并且<=15 =SUM(COUNTIF(data,{">=10",">15"})*{1,-1})

(4) >10并且<15 =SUM(COUNTIF(data,{">10",">=15"})*{1,-1})

注：一般多條件計數使用SUMPRODUCT函數，以上方法較少使用，僅供參考。

補充：三個區域計數：

三個區域中>=60 =SUM(COUNTIF(INDIRECT({"a46：a48","b48：b50","c47：c48"}),">=60"))

五、各種特殊統計要求的計算 A2：A32 為存放數據的區域

(1)非空文本(僅包括可鍵入文本) =COUNTIF(A2：A32,">=!")

(2)所有非空文本 =COUNTIF(A2：A32,">=!")+COUNTIF(A2：A32,">="&CHAR(1))-COUNTIF(A2：A32,">= ") 或 {=SUM(COUNTIF(A2：A32,">="&{"!"," "})*{1,-1})+COUNTIF(A2：A32,">="&CHAR(1))}

(3)全部可見單元格 {=SUM(N(IF(ISERROR(A2：A32),1,SUBSTITUTE(A2：A32," ",""))<>""))}

(4)有效可見單元格 =COUNTIF(A2：A32,">=!")+COUNTIF(A2：A32,">="&CHAR(1))-COUNTIF(A2：A32,">= ")+COUNT(A2：A32)

(5)全部不見單元格(真空+空格+空文本) =COUNTIF(A2：A32,"")-COUNTIF(A2：A32,">=!")+COUNTIF(A2：A32,">= ")

(6)空格 =COUNTIF(A2：A32,">= ")-COUNTIF(A2：A32,">=!")

(7)空文本"" =COUNTIF(A2：A32,"")-COUNTIF(A2：A32,"=")

(8)邏輯與錯誤 =COUNTIF(A2：A32,"<>")-COUNTIF(A2：A32,"*")-COUNT(A2：A32)